3-Axis Vector DC Milligauss Meter Model MR3 with Probe
3-Axis Magnetoresistive Milligauss Meter MR3

Measures vector components (X, Y, Z) and magnitude of static magnetic field with USB datalogging.

$1,485.00$1,837.00 Select options This product has multiple variants. The options may be chosen on the product page
High Stability Single Axis DC Gaussmeter/Magnetometer measuring magnet
DC Gaussmeter Model GM1-HS

The Gaussmeter Model GM1-HS reads moderate-strength static magnetic fields up to 800 G with a resolution of 0.01G. It measures magnetization of ferrous metals, solenoids and the far field of strong magnets

$500.00 Select options
Single-Axis DC Gaussmeter measuring magnet, 20 kG range
DC Gaussmeter Model GM1-ST

The Gaussmeter Model GM1-ST measures the field of even the strongest magnet (to 20kG) down to fine resolution (0.1G). Features rapid turn-on and fast update.

$500.00 Select options
Magnetic Wave Amplifier (MagWave)
Magnetic Wave Amplifier (MagWave)

The MagWave, a fast magnetic waveform sensor, is intended to display pulses of magnetic field (one axis of the field) on an oscilloscope (not included). It accurately converts magnetic signals into voltage signals in real-time.

These capabilities make the MagWave an ideal instrument for measuring the output from PEMF generating equipment or other rapidly changing magnetic sources.

$540.00 Add to cart
Low-Noise Preamplifier (Model LNA10) for use with oscilloscopes
Oscilloscope Preamplifier LNA10

 The LNA 10 oscilloscope preamp will significantly improve the small-signal performance of oscilloscopes at frequencies below 1MHz.  

$385.00 Add to cart
Trifield® EMF Meter Model TF2
Trifield® EMF Meter Model TF2
FREE SHIPPING (UPS Ground to anywhere in the Continental United States)

The TriField EMF Meter is an AC gaussmeter, AC electric field meter, and radio power density meter in a single unit, that combines all the features needed for fast, accurate measurements of electromagnetic fields (EMF). In addition to standard AC measurement modes, a special frequency weighted mode will properly scale the magnetic and electric measurements to indicate the full magnitude of currents produced by each type of field inside the human body. Comes with a soft carry case.

TF2 Quick Start Guide

$186.00 Add to cart
Single Axis AC/DC Gaussmeter/Magnetometer measuring a magnet with a Universal ST probe
Gaussmeter Model GM2

Laboratory gaussmeter that reads AC/DC magnetic fields, true peak field, has an alarm and USB datalogging. Maximum range is 30,000 gauss.

From: $902.00 Select options
3-Axis DC Gaussmeter/Vector Magnetometer measuring a magnet
Vector/Magnitude Gauss Meter Model VGM

Displays X, Y, Z and magnitude, for rapid magnetic field measurements, such as mapping the MRI fringe field (including the 5 gauss line) and scanning for residual magnetism. Displays the field values, with a user selectable sound and light alarm and USB datalogging. Maximum range is ±799.99 gauss.

$940.00 Select options
Ultra Stable Surface Voltmeter Model USSVM2, Static Charge Meter for measuring static electricity
Ultra Stable Surface DC Volt Meter USSVM2

An electrostatic meter, the USSVM2 reads static electricity without contact. It measures voltage on surfaces and can be used to calculate charge density on insulators. It has peak hold and a resolution of 1/10 of a volt on a 20K volt range.

$1,298.00 Select options This product has multiple variants. The options may be chosen on the product page
Air Ion Counter AIC2
Air Ion Counter Model AIC2

AIC2 is discontinued, new version available! Click Here for AIC3Pro

The Air Ion Counter Model AIC2 is a Gerdien condenser meter that measures the number of positive negative ions in air, with USB datalogging.

 

$990.00 Read more
AIC3 Pro, Air Ion Counter AIC3 Pro
Air Ion Counter Model AIC3Pro

Precis-Ion™ Air Ion Counter Model AIC3Pro is a lightweight, handheld Gerdien condenser meter that measures the number of positive or negative air ions. The meter can display both polarities and their sum. It also features a Li battery and data/time stamped data recording via a removable MicroSD card.

$1,090.00 Add to cart
ES3 Surface Static Electricity Meter
Static Electricity Meter Electrostat ES3

An electrostatic meter, The Electrostat ES3 is a handheld meter that interfaces with our Static Electricity Sensor (SES) and reads static electricity without contact.

 

The SES sensor is included with the purchase of the ES3, and is on a 1 meter detachable cable.

 

Made in USA

$740.00 Select options